Kmc-controls STE-1422 Manual do Utilizador Página 2

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 2
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 1
STE-1421/1422 2 Installation Guide© 2014 KMC Controls, Inc. 717-019-17E
KMC Controls, Inc.
19476 Industrial Drive
NewParis,IN46553
574.831.5250
www.kmccontrols.com
Specifications
Standard Lengths 4" (STE-1421) or 6" (STE-1422)
Sensor TypeIII,10Kohm@77°F(25°C)
Temperature Limits –4to221°F(–20to105°C)
Wiring 22AWGwireleads
Case Plastic standard; metal optional
Accessories
HMO-4532 Thermal compound (1 oz.) for
thermowells
HMO-4534 4-inch 304 stainless-steel ther-
mowell (for the STE-1421)
HMO-4544 6-inch 304 stainless-steel ther-
mowell (for the STE-1422)
1.75"
Stem Length (see description)
0.260"
0.500"
0.25"
Maintenance
No routine maintenance is required. Careful
installation will ensure long term reliability and
performance.
Configuration
Forcontrollerconguration,seetheType III Sensors
Applications GuideontheKMCwebsite.
More Information
For additional information,
see the STE-1400 Series
Data SheetontheKMC
web site.
For troubleshooting, con-
troller conguration, and
other information,seethe
Type III Sensors Applica-
tions GuideontheKMC
web site.
Important Notices
TheKMClogoandKMCControlsareregistered
trademarksofKMCControls,Inc.
All rights reserved. No part of this publication may
bereproduced,transmied,transcribed,storedina
retrievalsystem,ortranslatedintoanylanguagein
anyformbyanymeanswithoutthewrienpermis-
sionofKMCControls,Inc.
The material in this document is for information
purposes only. The contents and the product it
describes are subject to change without notice.
KMCControls,Inc.makesnorepresentationsor
warranties with respect to this document. In no event
shallKMCControls,Inc.beliableforanydamages,
directorincidental,arisingoutoforrelatedtothe
use of this document.
NOTE: NPT Thread Size = 1/2 inch
Vista de página 1
1 2

Comentários a estes Manuais

Sem comentários