Kmc-controls MCP-1020 Series Manual do Utilizador descarregar pdf (Página 1)

Installation Guide

2” Pneumatic Damper Actuator

MCP-1020 Series

Mounting

1. Slide the crankarm over the damper shaft.

2. Determine whether the damper shaft must rotate Clockwise (CW ) or Counter Clockwise (CCW).

3. Locate the half-circle cutouts on the outside corners of the bracket.

4. Place the appropriate half circle cutout over (for clockwise rotation), or under (for counter clockwise

rotation) the damper shaft.

5. Loosely mount the actuator externally on the duct or air handling unit.

6. Leave sufficient room for adjusting and servicing the unit.

7. Position the damper for its “normal” position.

8. Tighten the crankarm set screws.

9. Check that the linkage will not bind as the shaft extends and retracts.

10. Firmly anchor the bracket to the duct. The actuator assembly is positioned for 90° rotation.

Connections

♦ Use 1/4" (6 mm) O.D. polyethlyene tubing.

♦ Use only clean, dry control air. No attempt should be made to use any other medium.

NOTE: If the application requires operation near the maximum temperature and maximum pressure,

add a tubing restraint to the actuator connection.

1. Connect the signal (0–20 psig) to the 3/16" fitting on the base of the actuator.

2. Slowly apply supply pressure to fully stroke the actuator and linkage.

3. Check for any binding. Fine tuning can be accomplished by adjusting the balljoint on the pushrod.

1 2

Resumo do Conteúdo

Página 1 - Installation Guide

Installation Guide2” Pneumatic Damper ActuatorMCP-1020 SeriesMounting1. Slide the crankarm over the damper shaft.2. Determine whether the damper shaft

Página 2 - Maintenance

Adjustments and CalibrationNo adjustments or fine tuning are necessary.KMC Controls19476 Industrial DriveNew Paris, IN 46553 574.831.5250www. kmccont

Comentários a estes Manuais

Sem comentários

Kmc-controls MCP-1020 Series Manual do Utilizador Página 1

Consulte online ou descarregue Manual do Utilizador para Sensores Kmc-controls MCP-1020 Series. KMC Controls MCP-1020 Series User Manual Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais

Kmc-controls MCP-1020 Series Manual do Utilizador Página 1

Consulte online ou descarregue Manual do Utilizador para Sensores Kmc-controls MCP-1020 Series. KMC Controls MCP-1020 Series User Manual Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais

Manuais e produtos relacionados com Sensores Kmc-controls MCP-1020 Series